How to Adjust Recipes for the 24oz Deluxe Pint
This post contains affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you.
The Simple Math
Every standard Ninja Creami recipe is designed for a 16-ounce pint. The Deluxe and XL Deluxe models use 24-ounce pints. The conversion is straightforward: 24 ounces is exactly 50% more than 16 ounces, so you multiply every ingredient by 1.5.
Quick conversion chart:
| 16oz Recipe | 24oz Recipe |
|---|---|
| 1 cup | 1.5 cups |
| 3/4 cup | 1 cup + 2 tbsp |
| 1/2 cup | 3/4 cup |
| 1/3 cup | 1/2 cup |
| 1/4 cup | 3/8 cup (6 tbsp) |
| 2 tablespoons | 3 tablespoons |
| 1 tablespoon | 1.5 tablespoons |
| 1 teaspoon | 1.5 teaspoons |
That is all there is to it for basic recipes. Multiply by 1.5 and you have a perfectly scaled Deluxe recipe. Every recipe on eatcreami has a built-in scaler that does this automatically — just select your Creami model in the recipe card and all measurements adjust.
When Simple Math Is Not Enough
For most recipes, the 1.5x multiplication works perfectly. But there are a few situations where you need to think about the conversion more carefully.
Alcohol
Alcohol is one area where blindly multiplying by 1.5 can cause problems. If a 16-ounce recipe calls for 2 tablespoons of bourbon (the maximum recommended), multiplying by 1.5 gives you 3 tablespoons. This is technically fine because the larger pint has more non-alcohol volume to offset it, but you are now at the upper limit. The base may take longer to freeze and the center may be slightly softer.
If a 16-ounce recipe already uses 3 tablespoons of alcohol (which is the maximum we recommend for a 16-ounce pint), do not multiply by 1.5. That would give you 4.5 tablespoons in a 24-ounce pint, which risks the base not freezing properly. In this case, use 3-4 tablespoons maximum and accept that the flavor might be slightly less prominent than the original recipe.
Extracts and Flavorings
Extracts like vanilla, peppermint, and almond are very concentrated. Some people find that 1.5x extract produces an overly strong flavor in the Deluxe pint because the larger volume retains more aroma. If you are sensitive to strong extract flavors, start with 1.25x rather than 1.5x and adjust to taste.
For example, if a 16-ounce recipe calls for 1 teaspoon of peppermint extract, try 1.25 teaspoons in the 24-ounce version rather than the full 1.5 teaspoons. Peppermint is especially potent and can overwhelm a recipe if overdone.
Cream Cheese
Cream cheese serves as a texture stabilizer in Creami recipes. The standard amount is 1 tablespoon per 16-ounce pint. For the Deluxe, use 1.5 tablespoons (which is a tablespoon and a half, or about 22 grams). Rounding up to 2 tablespoons is fine and actually produces slightly better texture in the larger pint because the additional emulsifiers help manage the larger volume of ice crystals.
Philadelphia Original Cream CheeseThe go-to stabilizer for smoother, denser Creami ice creamView on Amazon →
Mix-In Quantities
Mix-ins (chocolate chips, cookie pieces, candy, nuts) follow the 1.5x rule, but consider whether you actually want 50% more mix-ins. Sometimes the original 16-ounce mix-in quantity in a 24-ounce pint is perfectly fine because it gives you more ice cream per bite with occasional mix-in hits rather than mix-ins in every bite. Try both ways and see which you prefer.
Processing Differences
Freeze Time
The freeze time for 24-ounce pints is the same as 16-ounce: 24 hours. The larger pint takes slightly longer to freeze all the way through due to the greater volume, but 24 hours is sufficient for complete freezing. If you are in a hurry and checking the pint at the 20-hour mark, the center of a 24-ounce pint is more likely to still be slightly soft than a 16-ounce pint would be. Give it the full 24 hours.
Processing Time
The Creami automatically adjusts processing time based on the program selected, and the Deluxe programs are calibrated for the 24-ounce pint. You do not need to manually adjust anything. However, the larger volume means the blade has 50% more base to process, so the processing may sound slightly different (the motor works harder for a bit longer at the end of the cycle).
Re-Spins
Deluxe pints are slightly more likely to need a Re-Spin compared to standard pints. The larger volume means the blade has to travel further and process more material. If your first spin looks good on the sides but crumbly in the center, a single Re-Spin almost always solves it. For protein bases and low-fat recipes in the Deluxe, plan for 2 Re-Spins as a standard practice.
Common Mistakes Deluxe Owners Make
Using the Wrong Pints
The 24-ounce Deluxe pints and the 16-ounce standard pints are not interchangeable. They are different physical sizes. A 16-ounce pint in a Deluxe machine sits too low — the blade may not reach the base properly. A 24-ounce pint will not fit in a standard Creami machine at all. Always use the correct pint for your model.
Ninja CREAMi Deluxe 24 oz Tubs 2-PackOfficial Ninja 24 oz tubs with storage lids — fits CREAMi Deluxe NC500/NC600 seriesView on Amazon →
Overfilling
The Deluxe pint has a MAX FILL line just like the standard pint. Fill to that line and no higher. Overfilling a 24-ounce pint causes the same problems as overfilling a 16-ounce pint: the base pushes against the lid during freezing, which can crack the lid or cause the base to freeze unevenly. The temptation to squeeze in just a little more is stronger with the Deluxe because you are already making a large batch, but resist it.
Not Adjusting Recipes
Some Deluxe owners try to use standard 16-ounce recipes in their 24-ounce pints without scaling up. The result is a pint that is only two-thirds full, which processes fine but wastes a third of the pint's capacity. Always scale up your recipes for the Deluxe. The whole point of the larger pint is more ice cream per batch.
Expecting the Same Texture
The 24-ounce Deluxe pint produces ice cream that is very slightly different in texture from the standard 16-ounce pint. The difference is subtle and most people do not notice it, but if you have used a standard Creami extensively and switch to the Deluxe, you may notice that the Deluxe version is very marginally less airy. This is because the larger volume of base provides more resistance to the blade, resulting in slightly less air incorporation. Many people actually prefer this denser texture.
Advantages of the 24oz Pint
More Ice Cream, Less Work
A 24-ounce pint produces 6 servings instead of 4. For families of 4-6 people, this means one pint per dessert instead of needing two standard pints. The time savings add up: one base to mix, one pint to freeze, one processing cycle instead of two. Over a week of daily ice cream, you save significant prep time.
Better for Entertaining
When hosting guests, 24-ounce pints mean fewer pints to process and manage. A party that would require 8-10 standard pints only needs 5-6 Deluxe pints for the same amount of ice cream. Less freezer space needed, fewer pints to track, and fewer processing cycles during the party.
Meal Prep Efficiency
For meal preppers who make protein ice cream for the week, the 24-ounce pint is ideal. One Deluxe pint divided into 6 portions gives you nearly a week of post-workout snacks from a single prep session. This is meaningfully more efficient than making two standard pints to achieve the same result.

Chocolate Protein Ice Cream
High-protein, low-calorie chocolate ice cream that tastes like a fudge brownie. Perfect for fitness enthusiasts who refuse to give up dessert.
Scaling Down: Making 16oz in a Deluxe
You can fill a 24-ounce Deluxe pint with only 16 ounces of base (a standard recipe without scaling) and it will process fine. The blade reaches far enough down to process the smaller volume. The ice cream may be slightly more airy than a full 24-ounce batch because the blade has less resistance, but the difference is minimal. This is useful when you want to try a new recipe without committing to a full Deluxe batch.